Specifications

31
Description of function keys:
IP Address: Enter the 4-byte IP Address in the appropriate blank space (the value in each
box may be anywhere between 0 and 255). Every IP camera has to own an IP address to
be identified on the network.
Netmask: Fill in the 4-byte Subnet Mask in the required blank spaces (usually any numbers
between 0 and 255). It is used to identify the subnet where the IP camera is sited.
Default Gateway: Type in the 4-byte Gateway in the relevant blank spaces (each unit value
must be between 0 and 255).
Primary Nameserver: Enter the 4-byte DNS Server Address in the blank spaces provided
(each value unit must be between 0 and 255). The DNS Server is in charge of translating
the Domain Name into the IP Address.
HTTP Port: Indicates the specific HTTP Port Number. The default is 80.
Submit: Click to submit the new network setting to the IP camera.