User's Manual

LR-911 2.6H3
AWID PROPRIETARY
Page 14 9/26/2007
a. Check to ensure that all connections are secure. Feed all wires through the cable
access hole to the rear or the side of the mounting position.
b. Mount the Reader using fasteners on the aluminum plate to which the LR-911
Reader is attached. Drill holes through the plate as required by the application,
or attach flexible mounting devices or clamps.
c. Adjust the position or the angle of the Reader so that the tags (which have been
fastened by adhesive to the windshield or other surface) are detected and read at
the desired distance from the Reader.