User's Manual

MPR-1914 - 6 - 1/2/2015
Professional Installation Instructions
1. Installation personnel
This product is designed for specific application and needs to be installed by a
qualified personnel with knowledge in RF and related regulations. The general
user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna be kept
20cm from nearby person in normal operational condition to meet regulatory RF
exposure requirement.
3. External antenna
Use only the antennas which have been submitted for certification agencies
approval by the applicant. The non-approved antenna(s) may produce unwanted
spurious or excessive RF transmitting power which may lead to the violation of
FCC/IC limit and is prohibited.
4. Installation procedure
Please refer to users manual for detail.
5. Warning
Please carefully select the installation position and make sure that the final
output power does not exceed the limit set forth in relevant rules. The
violation of the rule could lead to serious federal penalty.
Instructions d'installation professionnelle
1. Installation
Ce produit est destine a un usage specifique et doit etre installe par un personnel
qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les
reglages ne doivent pas etre modifies par l'utilisateur final.
2. Emplacement d'installation
En usage normal, afin de respecter les exigences reglementaires concernant
l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une
distance de 20 cm entre l'antenne emettrice et les personnes.
3. Antenn externe.
Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres
antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel
depassant les niveaux limites definis par FCC/IC, ce qui est interdit.
4. Procedure d'installation
Consulter le manuel d'utilisation.