User's Manual

MPR-1910 - 9 - 9/21/2009
INSTALLATION PROCEDURE
This section provides installation and operation information for MPR-1980 reader modules.
3.2 PARTS LIST
Verify that all items listed below are present before starting the installation.
o Sentinel-Sense MPR-1910 Qty=1
o Documentation and command demo program CD Qty=1
3.3 PREPARATION FOR INSTALLATION
Familiarize yourself with the connectors and pin out assignment of each I/O connectors.
3.3.1 Bench Top Verification
It is always a good idea to verify system operation before committing to a full-scale
installation. The following are the necessary steps to test the reader’s operation in a
static environment.
 Connect MPR-1910 to the RS-232 port of a PC through the interface board
provided in the demonstration kit
 Connect the power jack from the wall plug power supply to reader module
 Power up PC
 Install demo software on PC
 Activate demo software and verify performance of the reader.
 Select COM port 1 on top page then click “Connect”. Follow with some
commands.