User's Manual

ManualsBrandsApplied Wireless Identifications Group ManualsElectronicsMPR-1910 RFID Reader Module

1

2

3

4

5

6

7

8

9

Table Of Contents

MPR-1910 - 8 - 9/21/2009

3 INSTALLATION & OPERATION GUIDELINES

For ease of explanation, MPR reader in this section refers to an RFID device that

consists of MPR-1910 and a high performance circular polarized antenna inside a

splash proof, UV stabilized housing case. The module should be installed on a heat

sink. Example of a heat sink could be an aluminum plate of size 8”x8”x0.1” exposed to

convection air flow. The screws at the bottom of module shall be used for mounting the

module on the heat sink.

3.1 GENERAL WIRING REQUIREMENTS

MPR-19xx requires 10-pin flat flex cable (FFC) to connect from the supply source. Avoid

using long (e.g., 1” or longer) cables when connecting the unit from the power supply

source.