User's Manual

3
FSCM NO.
March 5, 2007
DWG #2010B-041233
MPR-2012 ANT page
APPLIED WIRELESS ID
SIZE
A
SCALE
AWID PROPRIETARY
SHEET 2
REV D
1.0 Scope
This specification describes the electrical, mechanical and environmental requirements
for circular polarized UHF antenna, designed to work in conjunction with MPR-2010A or
MPR-2010B series of UHF RFID readers.
2.0 Applicable Documents
The following documents of the exact issue shown, form a part of this specification to the
extent specified herein. In the event of conflict between this document and the documents
referenced herein, the contents of this document shall prevail.
Specifications
Handbooks
Mil-HDBK-217E Reliability Prediction for Electronic Equipment
Standards
ISO-18000-6A/B ISO/IEC FCD 18000-6 (ISO/IEC JTC 1/SC 31/WG 4/SG 3)
EPC C1 & C0 EPC
TM
Tag Data Standards Version 1.1 Rev.1.22
EPC C1G2 EPC RFID Protocols Class-1 Generation-2 UHF RFID, V1.0.1
EPC 1.19 UCODE V1.19 (SL31C31 01) Functional Specification
Matrics Class 0 Tag “Write” Module Design Specification V1.1
Impinj Zuma (TBD)
3.0 Requirements
This RFID module shall transmit a CW or command signals to activate RFID tags in its
zone of surveillance and this RFID module shall also decoded the backscattered signal
from RFID tags.
3.1 Common Requirements
3.1.1 Form factor
The outline dimensions of the RFID antenna is
shown in the photo and Figure 1 is the mechanical dimension details of the antenna unit.
The antenna unit shall measured 8x9.5x1.0 inches.