User's Manual

Page 14 12/21/2004
AWID PROPRIETARY
3.3. INSTALLATION STEPS
•
Check to ensure that all connections are secure. Make sure all wires through the
cable clamps are anchored properly; avoid dangling wires that may become safety
hazard.
• Mount the Reader using the two recessed threaded holes to fasten to reader on the
desired mounting surface. Please note that the threaded inserts are closed ended,
user must select screws with exact length to ensure proper tightening of the
mounting screws. In cases where the reader aiming is critical, please order antenna-
mounting bracket (P/N LRMB) from AWID. This mounting bracket provides pan/tilt
adjustment for the reader. User can also drill holes through the plate as required at
the desired distance from the Reader.
Formatted: Bullets and Numbering