User's Manual

MPR-1510BR 2.7e1 Page 5 11/10/2006
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 6 dBi. Antennas not included in this list or having a gain greater than 6
dBi are strictly prohibited for use with this device.
Mfg Model Type Maximum
Gain
(dBi)
AWID MPR2010ANT Patch 5.59
AWID 915CPS-A (with 8ft cable
AWID PN: RTC8)
Patch 4.9
Snyder 1x4 Dipole Dipole 2.15
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication.
The OEM integrator will control
1
the appropriate power level based on input data as listed in
table below:
•
1
This refers to a special OEM capability to set the upper limit of the RF Power Level for the device and
the operation is password protected. It is not published as one of the protocol commands that are
available to end users.
Pout (dBm) Code Pout (dBm) Code
30.0 0 20.0 226
29.5 45 19.5 228
29.0 70 19.0 231
28.5 90 18.5 233
28.0 110 18.0 234
27.5 126 17.5 235
27.0 140 17.0 236
26.5 152 16.5 237
26.0 162 16.0 239
25.5 173 15.5 240
25.0 182 14.5 241
24.5 189 14.0 242
24.0 197 12.5 244
23.5 201 11.5 246
23.0 206 10.5 247
22.5 211 10.0 249
22.0 215 7.5 251
21.5 218 7.0 252
21.0 221 6.0 254
20.5 224 5.5 255