User's Manual

MPR-1510BR 2.7e1 Page 11 11/10/2006
4 INSTALLATION PROCEDURE
This section provides installation and operation information for MPR readers.
4.1 PARTS LIST
Verify that all items listed below are present before starting the installation.
o Sentinel-Sense MPR-1510BR 2.7e Qty=1
o Documentation and Demo Program CD Qty=1
4.2 PREPARATION FOR INSTALLATION
Familiarize yourself with the connectors and pin out assignment of each I/O connectors.
4.2.1 Bench Top Verification
It is always a good idea to verify system operation before committing to a full-scale
installation. The following are the necessary steps to test the reader’s operation in a
static environment.
 Connect MPR reader module to the RS-232 port of a PC
 Connect the power jack from the wall plug power supply to reader module
 Power up PC
 Install demo software on PC
 Activate demo software and verify performance of the reader.
 Select a COM port on top page then click “Connect”. Follow with some
commands.