User's Manual

MPR-1510BR 2.7c Page 5 11/9/2006
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 6 dBi. Antennas not included in this list or having a gain greater than 6
dBi are strictly prohibited for use with this device.
Mfg Model Type Maximum
Gain
(dBi)
AWID MPR2010ANT Patch 5.59
AWID 915CPS-A (with 8ft cable
AWID PN: RTC8)
Patch 4.9
Snyder 1x4 Dipole Dipole 2.15
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication.
The OEM integrator will control
1
the appropriate power level based on input data as listed in
table below.
Pout (dBm) Code Pout (dBm) Code
28.0 0 22.0 228
27.5 100 21.5 233
27.0 125 21.0 237
26.5 146 20.5 240
25.5 176 20.0 243
25.0 188 19.5 246
24.5 198 19.0 248
24.0 206 18.5 251
23.5 212 18.0 253
23.0 218 17.5 254
22.5 223 17.0 255
•
1
This refers to a special OEM capability to set the upper limit of the RF Power Level for the device and
the operation is password protected.