User's Manual

AWID PROPRIETARY

Table of Contents

1.0 Introduction………………………………………………………………………Page 3

1.1 General Description..………………………………………………………….. 3

1.2 Special Features…………………………………………………………….… 3

1.3 Suggested Applications………………..………………………….…………. 3

2.0 Principal of Operation………………………………………………………………… 3

3.0 Specifications…………………………………………………………………………. 4

3.1 Measuring Read Distance…..……………..……….……………….………. 4

4.0 Preparation for Installation………….…………………………...…………………... 4

4.1 Site Survey……………………………………………………………………. 4

4.2 Preferred Reader Installation Practice……………………………………… 5

4.3 Metal Mounting…………………………….…………………………………. 5

4.4 General Wiring Requirements…………………..……...…………………... 5

4.5 Power Supply…………………………………………….…………………… 6

4.6 Power Supply Current Draw and Wiring Gauge …………………………. 6

4.7 Grounding…………………………………………………………………….. 7

4.8 Wiring Diagrams……………………………………………………………... 8

5.0 Installation Procedure……………………….……………………….……………... 8

5.1 Parts List……………………………………………………………………… 8

5.2 Installation Steps………………………………..…………………………… 8

5.3 Verification…………………………………………….……………………… 8

5.4 Mounting……………………………………………………………………... 11

5.5 FCC RF Exposure compliance…………………………………………….. 11

6.0 Warranty…………………….……………………………………………….……….. 11

7.0 Return Material Authorization (RMA)……………………………………...…..…. 11

8.0 Troubleshooting……….………………………………………………….……….…... 11

9.0 Patents and Approvals…………………………………………………….……….... 12

NOTE: READ AND USE THIS MANUAL.

FAILURE TO DO SO MAY RESULT IN POOR READER PERFORMANCE OR EVEN

PERMANENT DAMAGE TO READER, WHICH COULD VOID THE READER

WARRANTY.

List of Tables

Table 4.4-1: Data Line’s Wiring Distance Requirement…………………………….Page 5

List of Figures

Figure 4.6-1: Fig. 4.6-1 Read Range VS. Wire Gauge and Supply Voltage (300 ft) Page 6

Figure 4.6-2: Fig. 4.6-1 Read Range VS. Wire Gauge and Supply Voltage (500 ft) ……. 7

Figure 5.2-1: Wiring Diagram for Wiegand Output Format……….…………….…………… 9

Figure 5.2-2: Wiring Diagram for RS232 Output Format…………………………………….10

Figure 5.2-3: Wiring Diagram for RS232 & Wiegand Output Format…….…………………1