User's Manual

When troubleshooting, try to identify the source of the problem to a unit level. “Is the problem

originating from the panel?” Or “is the problem originating from the Reader? “ Maybe the

problem “is the power supply?”

All AWID’s readers will need only a power supply and a valid card to work properly. If the

reader is connected with RED (+6…16V) and BLACK (Ground), and presented with a valid card,

the reader will successfully display valid data at the test computer.

To check the validity of the output data in the absence of a panel, you will need to build a patch

cable between the reader and a PC. Call AWID’s Technical Support for details.

If a problem persists, consult the system manufacturer. If problem is the reader, consult AWID’s

Technical Assistance Department. AWID help desk is opened from 8:00 AM to 8:00 PM

Eastern Standard Time, and can be reached by dialing

1-800-369-5533.

9.0 PATENTS AND APPROVALS

AWID products are covered by United States patent _________, patent pending.

AWID logo is a registered trademark of Applied Wireless Identifications Group, Inc.

Where required, AWID’s products are approved by the appropriate regulatory agencies:

U. S. Federal Communications Commission: Part 15

Underwriter Laboratory: Designed to meet UL 294

Designed to Comply with: CE, UL, VDE, BZT, DTI & PTT

Information To The User

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.