User's Manual

Chapter 3 Getting Connected
25
Specifying an IP Address
If there is no DHCP server in your LAN environment,
assign IP addresses to each HH-6600 as follows:
1. Tap Start → Settings → Control Panel and then
double-tap Network and Dial-up Connections.
2. Tap the SDCCF10G1 icon next to Specify IP Address.
3. Input the proper IP address, Subnet Mask, and Default
Gateway.
4. Tap the Name Servers tab, and then input the proper
Primary DNS, Secondary DNS, Primary WINS, and
Secondary WINS.
To avoid conflict with your LAN environment, consult
with your MIS department for the correct TCP/IP
setting.