User's Manual

Table Of Contents

Checking the Main and Backup Battery Status

This section describes how to view the power level for

both the main and backup battery. To minimize power

consumption, you can define settings for the auto-off

function and the processor’s operation speed.

To check the main and backup battery status:

1. Tap Start → Settings → Control Panel → Power:

The Power Properties screen appears.

2. The battery menu item displays the status of the main

and backup batteries.

On the screen shown here, the main battery is good,

but the backup battery charge is very low. You should

charge the backup battery as soon as possible in this

case.

NOTE:

It is necessary to charge the battery when the

battery charge reaches below 10%. If the battery

does not accept a charge, contact AWID Technical

Support.

Main battery voltage