User's Manual

DL-1027 - 5 - 2/28/2011
Your best option for Proximity Access Control
5
1 INTRODUCTION
AWID's Sentinel-Prox DL-1027 Reader is a dual frequencies versatile smart card/smart
label and proximity card reader for switch plate mounting. This Reader will provide
simultaneous Wiegand and RS-232 output formats. Its primary applications are Access
Control and Time & Attendance applications.
1.1 GENERAL DESCRIPTIONS
o Slim door side or wall mounting
o LED visual indicator
o Indoor or outdoor installation
o Audible feedback
1.2 SPECIAL FEATURES
o Simultaneous Wiegand (Access Control) and RS-232 (Time & Attendance)
outputs
o Slim housing designed for door frame
o Permanently sealed electronics for indoor/outdoor application
o UV stabilized plastic housing
1.3 SUGGESTED APPLICATIONS
o Access Control
o Time & Attendance
o Asset Management
o RFID
2 SPECIFICATIONS
Input voltage .....................+5V to +12 V
Input current .....................150 mA typical
Read range
Smart Card (ISO-14443 A/B) ……………Up to 1.5 inches (3.8 cm)
Smart Labels (ISO-15693)………………..Up to 3 inches (7.6 cm)
Proximity Card (125KHz) ……………….Up to 3 inches(7.6cm)
Transmit frequency .....................13.56 MHz (Pulse command) and 125KHz
Receiver frequency .....................13.56 MHz and 125KHz
Operating temperature range .....................-30° C to +65° C (-22° F to 149° F)
Output format available …….……….Wiegand & RS-232 (Standard)
(Others are available upon request)
Color .....................Dark Gray
2.1 MEASURING READ DISTANCE
To measure the read range between Reader and card, grasp the card by the corner or
near the slot and move the card slowly toward the Reader, with the card surface parallel