Technical data

QF150SU; edition 2014-10; page 14 of 19
4.1.2. Installation of the pump chamber
Needed tools:
Allen key 8 mm;
Torque wrench with hexagon socket (3 mm) (e.g. Hazet 5108-2CT with 8501X-3)
Torque-screw driver with (e.g. Hazet 6001-1.5/3 with 2215LG-PH2)
1.
2.
3.
Pressure Plate
1. Install four bolts together with pressure plate.
Apply torque of 3 Nm (2.2 lb-ft)
Install pump chamber
1. Fasten screw of
clamping ring inside the
ring drive. Apply tightening
torque of 0.6 Nm (0.45 lb-
ft)
2. Install screw to close
ring drive