Instruction manual

K4, K6, K9 series chillers Installation and Operation manual
Issue 10.33
Page 5
Caution: Your K series chiller is fitted with a high pressure volumetric pump, capable of
supplying fluids at 150psi. Ensure that your plumbing is compatible.
Caution: Filling/topping up of the tank should only be undertaken with the unit switched
off, to prevent backflooding of the fluid.
Caution: All connections must be made with those supplied.
Caution: The high integrity refrigeration system contains no user-serviceable parts.
Repair and service requires specialised knowledge and tools. Any unauthorised tampering
with the refrigeration system automatically invalidates warranty.
Caution: THREE PHASE UNITS ARE NOT PHASE LOCKED, and whilst running the
pump backwards will not damage the unit, the pump and compressor will not operate
correctly if this is done.
1.1 Warranty registration
Caution: The warranty registration card must be completed and returned in order to
activate cover. Failure to do so will limit warranty to three months from date of despatch
from ATC.
1.2 Unpacking
Please check that both the packaging and the unit are undamaged. If there is any doubt, it
is vital that you inform both ATC and the carrier before making a claim on the carrier.
There are no hidden shipping bolts or other fixings. You should inspect the packaging for
signs of transit damage before signing for the unit, and if possible unpack the unit before
signing. Once you have signed for the goods, ATC cannot be held responsible for any
transit damage subsequently found.