Instruction manual

KT series chillers – Installation and Operation manual
Issue 7.0 Page 5
1.1 Warranty registration
The warranty registration card must be completed and returned to ATC.
This does not affect your statutory rights.
1.2 Unpacking
Please check that both the packaging and the unit are undamaged. If there is any doubt, it is
vital that you inform both ATC and the carrier before making a claim on the carrier. There
are no hidden shipping bolts or other fixings. You should inspect the packaging for signs of
transit damage before signing for the unit, and if possible unpack the unit before signing.
Once you have signed for the goods, ATC cannot be held responsible for any transit
damage subsequently found.
Warning: 30kg (66lb) – Two person lift required.
Remove the unit from its original packaging and ensure that there is no packaging left
around the cooling ducts.
Please retain all packaging in the unlikely event that the chiller needs to be returned to
our local representatives.
30 kg
Operator
section