User's Manual

APPLIED TECHNOLOGY SOLUTIONS, INC.
DOCUMENT: fcc1250MAN.wpd ISSUED:jan99 REVISED: (ORIGINAL) PAGE: 6
Model 1240. If the LOAD FAIL indicator lights, the key load sequence did not succeed. If this occurs, check the setting
of the KEY NUMBER switches to ensure that it is not set above 300. Verify that the interface plug on the Model 1260 cable
is fully seated into the KEY LOADER connector on the Key Load Adapter. Continuing LOAD FAIL indications mean that
either the Model 1260 or the Series 1250 is defective and should be returned for repair. If a Model 1260 is suspected of
failure, it should be tried with another System 1200 device. If failures still occur, the Model 1260 is defective.