User Manual

APPLIED TECHNOLOGY SOLUTIONS, INC.
Document: FCC1225manual.wpd issued: jan99 revised:(original) page: 2
RF CHARACTERISTICS
RF Channels: 2, Crystal Controlled
Normal Mode: Transmit/Receive Channel
A or B
Repeater Mode: Transmit Channel A,
Receive on Channel B
Transmit
Power Output: 900 mW
Emissions
Spurious: -55 dBc
Out Of Band: -20 dBc
Freq. Stability: +100 ppm -25
o
C to +68
o
C
Receive
Sensitivity: -95 dBm
Selectivity
Adjacent Channel: -65 dB
Spurious & Image: -85 dB
Antenna System
Antenna: ½ Wavelength, flexible
RF Output
Compatibility: 50 Ω
AUDIO CHARACTERISTICS
Frequency Response: + 6 dB, 300 - 5800 Hz
Microphone: Internal or external
Mic Audio Processing: Dual Time Constant AGC
Dynamic Range: 55 dB, Minimum
Speaker: Internal or Remote
Rated Audio Output: 400mW into 16 Ω (less
than 5% distortion)
Remote Speaker/Mic: Model 1230-04
VOICE DATA SCRAMBLING
Type: Synchronous Key Stream
Key Generation: External, Hand Held,
Model 1260 Key Loader
Key Storage: Internal, non-volatile
memory
Number of Keys: Two sets, Private and
Common
USER CONTROLS
On-Off/Volume
Channel (Mode) Select
Code Select
PTT
INDICATORS
Power/Battery Low
Transmit
POWER REQUIREMENTS
Battery Pack: 1200 mAh, Nickel
Cadmium, rechargeable
(1800 mAh available)
TEMPERATURE
Operating: -25
o
C to +68
o
C
Storage: -40
o
C to +85
o
C
PHYSICAL DIMENSIONS
Less Battery: 6.25" x 2.75" x 1.50"
(HxWxD), 1lbs.
With 1200 mAh
battery: 8.625" x 2.75" x 1.5"
(HxWxD), 1lbs.