User's Manual

FutureWaves™ User Manual
FutureWaves™ v1.7.0.1
7
Figure 4: Location of the ‘Transmit Power’ buttons and ‘Ready Status’ indicator in the Radar
Control section of the Radar-1 Tab.
7. Visually verify the radar is clear of any obstructions then click the Transmit Power ‘On’
button. This will energize the unit and begin rotating the antenna.
8. (Refer to Figure 5) To verify nominal operation of the radar and RPU, open the Sensor
Scope by pressing the ‘Scope’ button. You will see the text ‘Connecting…’ as it tries to
connect to the network. It may take up to 2 minutes for the radar scope to connect.
Figure 5: Locate ‘Scope’ Button and the show Radar Scope connecting in the Radar-1 Tab.