User's Manual

FutureWaves™ User Manual

FutureWaves™ v1.7.0.1

Display Tab

The Display Tab is controls whether warnings are displayed when performing ‘Power’ and

‘Reset’ operations and the units displayed in the GUI. This is shown in Figure 31.

Figure 31: The

Display Tab

in the

Control & Settings Panel

Turn Warnings Off/ Turn Warnings On

By default, each time the user does a ‘Power’ or ‘Restart’ to the PPU, RPU, or SMS through the

GUI, a confirmation dialog appears asking to confirm the operation. This button gives the user

control over whether these warnings are displayed. By clicking the ‘Turn Warnings Off’, it will

turn these warnings off.

Unit System:

This changes the units displayed on the GUI. By default the system is set to SI Units. The other

option is US Units. The current capability of the units change is limited. This dropdown will

toggle the units between meters/feet in the following sections: The Data Readout on the

Planning and Timing panels (see Figure 32), the Situational Awareness on the Planning and

Timing panels (see Figure 33), the Trends panel (see Figure 34), and the FutureWaves™ header

(see Figure 34).