User`s guide
12
To activate tracking mode:
1) From the HOME SCREEN, press the DOWN switch three times. The LCD should then
display:
Track Position?
Y
2) Press the ENTER switch to enable the tracing feature. The LCD will briefly show
TRACKING ON on the display. NavDive will then return to the HOME SCREEN.
3) When the tracking mode is enabled, a âTâ will be displayed in the upper right corner of
the LCD:
N 44 56.344 T
W092 16.987 5
Heading: 125.3876
4) To disable to tracking feature, from the HOME SCREEN, press the DOWN switch 3 times.
The LCD will then show the following:
Track Position?
Y
5) Press the RIGHT switch once to change the Y selection on the LCD to N. Then press the
ENTER switch to turn off tracking. NavDive will briefly display a message TRACKING OFF,
then will return to the HOME SCREEN.
6) As a positive indicator that tracking is now off, the âTâ in the upper right corner of the
HOME SCREEN will now be blank.
Ending the Dive
At the conclusion of your dive, follow the steps below:
1) On the HOME SCREEN, press the ENTER switch. The LCD will then show:
End Dive?