User Guide

ManualsBrandsApplied Energy ManualsOtherSUNSPOT

TechnicalKey FeaturesThe Range

Sunspot & Sunscreen Air Curtains

The Sunspot and Sunscreen range of fan assisted

hot air curtains, designed for installation above

external doors, effectively combats incoming cool

air. The Sunscreen can also run cold, forming a

barrier against dust and giving a cool refreshing

breeze in Summer.

• High volume throughput Sunscreen 3 or

4.5kW 150 cu.ft. per minute

• Integral switching simplifying installation

• Smooth running motors and balanced

tangential fan units for quiet and efﬁcient

operation

• Key hole slots are provided for ease of

installation and no back insulation is

necessary when mounting direct to wall

• Brackets are provided where adjustment

for the air ﬂow is required, i.e. when

mounted at high level to serve as a multi-

directional fan heater

• Built-in thermal cut-out for added safety

• Supplied with fully adjustable wall mounted

brackets which offer ﬂexible adjustment

• 1 year guarantee (UK)

• CE approved

Sunspot

• High volume throughput, 130 cu. ft. per

minute

• Integral switching 1.1kW, 2.25kW and cold

settings simplifying installation

• Smooth running motor with balanced

tangential fan unit for quiet and efﬁcient

operation

• Built-in thermal cut-out for added safety

• Wall mounting ﬁttings included

• 1 year guarantee (UK)

• CE approved

Dimensions

Product Short Catalogue Colour kW Loading Switching Recommended Recommended

Reference Code Number @ 240V Cable Size Fuse Rating

Sunspot RS2 50813907 Grey 2.25kW 1.1 - 2.2kW 1.5mm

13 amps

3kW Sunscreen RS1 50813905 Grey 3kW Cold, 1.5kW, 3kW 2.5mm

13 amps

4.5kW Sunscreen RS3 50813906 Grey 4.5kW Cold, 2.25kW, 4.5kW 4.0mm

13 amps

Sunspot • Element - Open coil supported by ceramic insulators • Zinc coated steel, powder coated body • Shaded pole motor • Grey colour • Single end connection conduit or cable

Sunscreen • Element - Open coil supported by ceramic insulators • Zinc coated steel, powder coated body • Shaded pole motor

4.5

Sunspot

44 www.redring.co.uk Sales Hotline: 08709 000420

Installation

• Ideally heaters should be mounted directly

above the door but in any case not more

than 2.25 metres high and not less than

1.8 metres high.

• Single end connection conduit or cable

Sunspot

Versatile brackets offer ﬂexible adjustment

Sunscreen

Product Selector

Power Output

Guarantee

Approvals

2.25

Summary of content (8 pages)

PAGE 1
Sunspot & Sunscreen Air Curtains The Range Key Features The Sunspot and Sunscreen range of fan assisted hot air curtains, designed for installation above external doors, effectively combats incoming cool air. The Sunscreen can also run cold, forming a barrier against dust and giving a cool refreshing breeze in Summer. Power Output 2.25 kW 3 kW 4.5 kW Approvals Guarantee Technical • High volume throughput Sunscreen 3 or 4.5kW 150 cu.ft.
PAGE 2
Sunfan Wall Mounted Fan Heater The Range Key Features The Sunfan is a robust 3kW high volume air throughput commercial/industrial wall mounted fan heater designed to provide highly efﬁcient heating in winter, or cool air circulation in Summer.
PAGE 3
Sunbase Plinth Fan Heater The Range Key Features The Sunbase is an integrally controlled space saving fan heater which provides warmth in winter or cool air in summer. Specially designed to occupy the space beneath cupboards, counters, display units or plinth mounted in ﬁtted kitchens.
PAGE 4
Suntube Tubular Heater The Range Key Features Suntubes are the perfect answer where a steady energy efﬁcient source of heat is needed, providing gentle background warmth and frost protection for both domestic and commercial applications. They are highly effective as window demisters and for horticultural use, providing invaluable, effective heating and frost protection in greenhouses and conservatories.
PAGE 5
Sunslim Radiant Heater The Range Key Features The Sunslim is a low cost, robust and easy to install radiant heater. Its tilt mounting allows heat to be localised, or directed at a general area. The Sunslim can be wall-mounted or ceiling hung.
PAGE 6
Ceramic Radiant Heater The Range Key Features Long wave infra-red heaters offer highly efﬁcient, silent, glare free localised heat. These heaters incorporate dual ceramic emitters to rapidly convert electrical energy into heat energy without producing light. With no moving parts these heaters are virtually maintenance-free. Power Output 2 kW 3 kW 4.5 kW Technical • Durable ceramic emitters which rapidly convert electrical energy into heat energy • Available in 2, 3 and 4.
PAGE 7
Sunquartz Infra-red Heaters The Range Key Features The sensation and welcome of instant heat right where it’s needed. Sunquartz short wave infra-red heaters warm people, not the air. Their uses are endless, from warehouses to churches. These efﬁcient sun-like heaters can penetrate damp air with little waste to the atmosphere. A cost efﬁcient way to heat large open spaces.
PAGE 8
Sunquartz Infra-red Heaters Dimensions Technical Automatic Controller This automatic controller, which senses movement by passive infra-red techniques, will automatically switch on the Sunquartz whenever movement is detected within its range. The heater will remain switched on for a preset time after the last movement is detected and then will switch off automatically. The unit is suitable for 220V/240V single phase operation and will switch 500W-6000W of heaters.