- SL100 - SL100P - SL100T - SL100HT - SL150 - SL150P - SL150HT Slimline Axial Fan Range Installation and maintenance instructions
SLIMLINE Series IPX4 INSTALLATION: Begin the installation by making a circular opening of 100 mm (SL100), 150 mm (SL150) diameter in the ceiling or wall where the extractor is to be installed. Remove the front cover (A) by removing screw (SL150 only) and pressing the catch (1) with the tip of a screwdriver until it is freed and then pulling it forward. Place the exhaust conduit (D) in the hole in the ceiling or wall for exhaust of the air.
Wiring Diagrams
Do’s and dont’s • Do read all the instruction leaflet before commencing installation. • Do install each fan with a double pole isolating switch. • Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any maintenance or cleaning Guarantee Customers outside UK – see international below. • UK: The fan is guaranteed against defects for 2 years from the date of purchase. • Please keep your purchase receipt.