User Guide

SELECTEC0 WATER-SAVE,
SELECTECO POWER-SAVE,
SELECTRONIC.
Not only is Selectronic Premier incredibly
easy to use, it’s ever so easy on the
pocket and the environment, too.
That’s because Selectronic incorporates features such
as the ingenious Eco Water-Save to automatically
calculate and adjust the optimum flow rate, taking into
account the incoming water temperature and restricting
the flow to 6 litres per minute. Unique to Selectronic,
Eco Water-Save ensures the shower conforms to the
‘Sustainable Home’ water consumption requirements
per person for showering.
In addition, the Eco Power-Save feature automatically
adjusts the power of the heating and elements and the
flow of water to achieve the desired water temperature.
Together, these advanced features help to bring savings
in both water and power.
DIP 1: This is used to select “Eco Power-Save”.
Fixed Flow
With the ‘DIP Switch’ pushed to the left the
shower will save power. As the temperature
is reduced, the shower will use less power
(Eco Power ON).
Maximise Flow
When the ‘DIP Switch’ is pushed to the right
the shower will use maximum power at all
temperature settings (Eco Power OFF).
DIP 2: Preset Start-up
With the ‘DIP Switch’ pushed to the left the
shower will start up at a preset temperature
every time it is used.
Previous Setting
When the ‘DIP Switch’ is pushed to the right
the shower will start up at the same temperature
as the last time the shower was used. E.g. If the
shower was set to Digit 4 (39°C) when it was
switched off, then it will start up at Digit 4 the
next time it is used.
DIP 3: This is used to select “Eco Water-Save”.
Flow Limited to 6 litres/minute max
When the ‘DIP Switch’ is pushed to the left the
shower will prevent high water flow rates. The
shower will not supply water at a flow rate greater
than 6 litres/minute (Eco Water-Save ON).
Temperature unaffected. This selection meets
the ‘Sustainable Home’ water consumption
requirement per person for showering.
Flow Limited to 9 litres/minute max
When the ‘DIP Switch’ is pushed to the right
the shower does not restrict the flow rate.
The shower is capable of supplying water
at flow rate greater than 6 litres/minute
(Eco Water-Save OFF).
PLEASE NOTE! The Selectronic Premier
is factory set with ‘DIP Switch’ set for
Eco showering.
6