User Guide

KEY TO DIAGRAMS
F1
1) Fan terminal block
2) Controller terminal block
3) Low sensor
4) High sensor
5) Double pole isolator
6) Fuse (6.3 amp F rated)
F2
7) ON/OFF switch
8) Forward or reverse running
9) Automatic or manual mode
10) Fan running indicator light
11) Ventilation slots
12) Speed/temperature setting
13) Screw cover
14) Fascia
15) Mounting frame
16) Metal wall box
17) Plastic surround
F4
206mm
182mm
210mm
210mm
45mm
41mm
86mm
86mm
81mm
86mm
Looking after the controller
CLEANING
1. Before cleaning isolate the controller
completely from the power supply.
2. Wipe the cover carefully with a damp cloth.
3. Dry thoroughly.
4. Ensure ventilation slots are free from
obstructions at all times.
• Never immerse the controller in
water or other liquids.
• Never use solvents to clean the
controller.
• Apart from cleaning, no other
maintenance is required.