User Guide

Connect to Power Supply

1. Ensure power supply is isolated and fuses are

removed.

2. Route the Cable from the Isolating Switch to

the point of connection to the power supply.

3. Make all connections within the isolating

Switch in accordance with the manufacturers

instructions.

4. Following all IEE and local regulations make

connection at point of power supply.

5. Make a final check to ensure all earth points

are connected and all covers have been

correctly replaced on the fan, controller and

isolating switch.

6. Replace all fuses, and switch on the power

supply.

Fig 1. Cable gland positions Fig 2a. Removing screw covers

Fig 2b. Removing fascia Fig 2c. Removing mounting frame

Ensure mounting frame

flange fits flush to the wall