Specifications

– 34 –
MAXON MODEL ( 400 ) OVENPAK Burners
1) GAS-ELECTRIC IGNITION
The gas-electric pilots used on MAXON burners are either flame rod or scanner design.
2) POOR FLAME SIGNAL
Try adjusting needle valve or pilot pressure regulator. Should this not be successful, check the primary pilot air.
If neither of these methods improve the reading, inspect the flame rod position.
MAXON Electrode & Flame Rod
ledoMrenruB
rotingIkrapS
snoisnemiD
doRemalF
snoisnemiD
XYXYZ
504
3.14.
4.69.2
M704
M804
804
M214
M314
514
5.14.
M224
524
2.14.8.8.015.3
M234
534
M244
544
3.14.4.8.219.2
M654
M074
M784