Installation manual

Member Air Movement and Control Association December 2000 Form 610590
LIMITED WARRANTY
WARRANTY AND DISCLAIMER: The
Company extends this limited warranty to the
original buyer and warrants that products
manufactured by the Company shall be free
from original defects in workmanship and mate-
rials for one year from date of shipment, pro-
vided same have been properly stored, in-
stalled, serviced, maintained and operated.
Warranty Start-Up sheet must be returned
within 30 days of start-up. This warranty shall
not apply to products which have been altered
or repaired without the Company’s express
authorization, or altered or repaired in any way
so as, in the Company’s judgment, to affect its
performance or reliability, nor which have been
improperly installed or subjected to misuse,
negligence, or accident, or incorrectly used in
combination with other substances. The Buyer
assumes all risks and liability for results of use
of the products. Warranties on purchased parts,
such as but not limited to bearings, sheaves,
belts, couplings, electric motors, pumps and
controls are limited to the terms of warranty ex
-
tended by our supplier.
Polyethylene tubing and cooling pads are war
-
ranted to be free of defects in material and
workmanship for a period of 90 days from date
of shipment and a like warranty applies to the
cross fluted cellular type cooling cells for a pe
-
riod of two years from date of shipment pro
-
vided same have been properly handled,
stored, installed, serviced, maintained and op
-
erated. And further, not subjected to excessive
heat, corrosive agents or chemicals, or me
-
chanical abuse that may cause tearing, crush
-
ing or undue deterioration nor used on a sys
-
tem or in a manner other than that for which it
was designed as explained in the product litera
-
ture.
LIMITATION OF REMEDY AND DAMAGES:
All claims under this warranty must be made in
writing and delivered to P. O. Box 978, Musko-
gee, Oklahoma, 74402, within 15 days after dis-
covery of the defect and prior to the expiration
of one year from the date of shipment by the
Company of the product claimed defective, and
Buyer shall be barred from any remedy if Buyer
fails to make such claim within such period.
Within 30 days after receipt of a timely claim,
the Company shall have the option either to in
-
spect the product while in Buyer’s possession
or to request Buyer to return the product to the
Company at Buyer’s expense for inspection by
the Company. The Company shall replace, or
at its option repair, free of charge, any product
it determines to be defective, and it shall ship
the repaired or replacement product to Buyer
F.O.B. point of shipment; provided, however, if
circumstances are such as in the Company’s
judgment to prohibit repair or replacement to
remedy the warranted defects, the Buyer’s sole
and exclusive remedy shall be a refund to the
Buyer of any part of the invoice price, paid to
the Company, for the defective product or part.
The Company is not responsible for the cost of
removal of the defective product or part, dam
-
ages due to removal, or any expenses incurred
in shipping the product or part to or from the
Company’s plant, or the installation of the re
-
paired or replaced product or part.
Implied warranties, when applicable, shall com
-
mence upon the same date as the express war
-
ranty provided above, and shall, except for war
-
ranties of title, extend only for the duration of
the express warranty. Some states do not allow
limitations on how long an implied warranty
lasts, so the above limitation may not apply to
you. The only remedy provided to you
under an applicable implied warranty
and the express warranty shall be the
remedy provided under the express
warranty, subject to the terms and con
-
ditions contained therein. The Company
shall not be liable for incidental and
consequential losses and damages un
-
der the express warranty, any applica
-
ble implied warranty, or claims for negligence,
except to the extent that this limitation is found
to be unenforceable under applicable state law.
Some states do not allow the exclusion or limi-
tation of incidental or consequential damages,
so the above limitation or exclusion may not ap-
ply to you. This warranty gives you specific le-
gal rights, and you may also have other rights
which vary from state to state.
No employee, agent, dealer, or other person is
authorized to give any warranties on behalf of
the Company or to assume for the Company
any other liability in connection with any of its
products except in writing and signed by an offi
-
cer of the Company.
REPLACEMENT PARTS If replacement parts
are ordered, buyer warrants that the original
components in which these replacement parts
will be placed are in satisfactory working condi
-
tion, and when said replacement parts are in
-
stalled, the resultant installation will operate in
a safe manner, at speeds and temperatures for
which the original equipment was purchased.
TECHNICAL ADVICE AND RECOMMENDA
-
TIONS, DISCLAIMER: Notwithstanding any
past practice or dealings or any custom of the
trade, sales shall not include the furnishing of
technical advice or assistance or system de
-
sign. Any such assistance shall be at the Com
-
pany’s sole option and may be subject to addi
-
tional charge.
The Company assumes no obligation or liability
on account of any recommendations, opinions
or advice as to the choice, installation or use of
products. Any such recommendations, opinions
or advice are given and shall be accepted at
your own risk and shall not constitute any war
-
ranty or guarantee of such products or their
performance.
GENERAL In no event shall any claim for con
-
sequential damages be made by either party.
The Company will comply with all applicable
Federal, State, and local laws.
TERMS AND CONDITIONS
DESIGN CHANGES Acme reserves the right to
make changes in design, improvements and
additions in and to its products any time without
imposing any liability or obligations to itself to
apply or install the same in any product manu
-
factured by it.
TITLE The title and right of possession of the
equipment sold herein shall remain with the
Company and such equipment shall remain
personal property until all payments herein (in
-
cluding deferred payments whether evidenced
by notes or otherwise) shall have been made in
full in cash and the Purchaser agrees to do all
acts necessary to perfect and maintain such
right and title in the Company.
SAFETY ACCESSORIES The Company manu
-
factures equipment designed to serve multiple
applications and offers a wide range of safety
equipment, including guards and other devices,
as may be required to meet customer specifica
-
tions. Without exception, the Company recom
-
mends that all orders include applicable safety
devices. Equipment ordered without applicable
safety devices is clearly the responsibility of the
Purchaser. Further, the Purchaser warrants
that he has determined and acquired any and
all safety devices required for equipment sold
by the Company. Weather covers and guards
for motor and V-belt drives, couplings, shafts
and bearings, along with inlet and outlet
screens, are optional accessories noted in the
price list.
WARNING Acme products are designed and manufactured to provide reliable performance but they are not guaranteed to be 100% free of defects.
Even reliable products will experience occasional failures and this possibility should be recognized by the User. If these products are used in a life sup
-
port ventilation system where failure could result in loss or injury, the User should provide adequate back-up ventilation, supplementary natural ventila
-
tion or failure alarm system, or acknowledge willingness to accept the risk of such loss or injury.
WARNING DO NOT use in HAZARDOUS ENVIRONMENTS where fan’s electrical system could provide ignition to combustible or flammable materials
unless unit is specifically built for hazardous environments.
CAUTION Guards must be installed when fan is within reach of personnel or within seven (7) feet (2.134 m) of working level or when deemed advisable
for safety.
DISCLAIMER The Company has made a diligent effort to illustrate and describe the products in this literature accurately; however, such illustrations and
descriptions are for the sole purpose of identification, and do not express or imply a warranty that the products are merchantable, or fit for a particular
purpose, or that the products will necessarily conform to the illustrations or descriptions or dimensions.
These instructions cover the usual installation, operation and maintenance methods for which the product(s) was designed. They do not purport to
cover all details or variations in the product(s) nor to provide for every possible contingency that might be met in connection with the installation, oper
-
ation and maintenance. For any departures from these instructions, or should particular problems arise which are not covered sufficiently for the pur
-
chaser’s purpose, the matter should be referred to the Company.
ACME ENGINEERING AND
MANUFACTURING CORPORATION
P.O. Box 978
Muskogee, Oklahoma 74402
918/682-7791 Fax: [phone]
[e-mail]
www.acmefan.com