Technical data

86 ServerIron ADX NAT64 Configuration Guide
53-1002288-02
ACL overview
5
DRAFT: BROCADE CONFIDENTIAL
• ipv6-operator routing when any protocol is specified. (Same limitation as for ipv6-operator
fragments)
• The following ICMPv6 Message Types are not supported:
When creating ACLs, use the appropriate syntax below for the protocol you are filtering.
DECIMAL
<0-255> ICMP message type
beyond-scope Destination Unreachable ICMP message, Beyond Scope
destination-unreachable Destination Unreachable ICMP messages
dscp Match dscp value in IPv6 packet
echo-reply Echo Reply ICMP message
echo-request Echo Request ICMP message
header Parameter Problem ICMP Message,Header Error
hop-limit Time Exceeded ICMP Message,In Transit
log Log matches against this entry
mld-query MLD Query Message
mld-reduction MLD Reduction Message
mld-report MLD Report Message
nd-na ND Neighbor Advertisement Message
nd-ns ND Neighbor Solicitation Message
next-header Parameter Problem ICMP Message,Next Header
no-admin Destination Unreachable ICMP Message,
Administratively Prohibited
no-route Destination Unreachable ICMP Message, No Route
packet-too-big Packet Too Big ICMP Message
parameter-option Parameter Problem ICMP Message,Option
parameter-problem Parameter Problem ICMP Messages
port-unreachable Destination Unreachable ICMP Message, Port Unreachable
reassembly-timeout Time Exceeded ICMP Message, ReassemblyTimeout
renum-command Renumber Command ICMP Message
renum-result Renumber Result ICMP Message
renum-seq-number Renumber Sequence Number ICMP Message
router-advertisement Router Advertisement ICMP Message
router-renumbering All Router Renumbering ICMP Messages
router-solicitation Router Solicitation ICMP Message
sequence Sequence number for this entry
time-exceeded Time Exceeded ICMP Messages
traffic-policy Attach traffic policy by name
unreachable Destination Unreachable ICMP message,Address Unreachable