Technical data

ServerIron ADX NAT64 Configuration Guide 25
53-1002288-02
Clearing NAT64 information
2
DRAFT: BROCADE CONFIDENTIAL
Clearing NAT64 information
You can clear the following information from a NAT64 configuration:
• NAT64 session entries from the session table
• NAT64 statistics (stateless and stateful)
Clearing NAT64 session entries from the session table
You can use the clear nat64 session command to clear NAT64 session entries from the session
table.on the ServerIron ADX. This output is displayed as follows.
ServerIron ADX# clear nat64 session
Syntax: clear nat64 session
Clearing stateless and stateful NAT64 statistics
You can use the clear nat64 statistics command to clear stateless and stateful NAT64 statistics.on
a ServerIron ADX. This command is issued as follows.
ServerIron ADX# clear nat64 statistics
Syntax: clear nat64 statistics
Number of free map entries: The number of free map entries.
NAT64 IPv4 NAT Pools: Lists all NAT64 pool configuration.
Number of NAT pools configured: The number of NAT pools configured on the system.
Number of NAT pool IPs configured: The number of NAT pool IP addresses configured on the
system. The maximum number is 192.
Head pool: Identifier of the first pool configured.
Current pool: Identifier of the current IPv4 pool being used.
nat64 pool test: Lists details about the NAT64 IPv4 pools on the system.
TABLE 7 Display fields for show ip nat statistics (Continued)
This field... Displays...