Technical data

20 ServerIron ADX NAT64 Configuration Guide
53-1002288-02
Displaying NAT64 information
2
DRAFT: BROCADE CONFIDENTIAL
Displaying NAT 64 statistics
You can use the show nat64 statistics command at the rconsole to display statistics for the NAT64
gateway. This command can be used for stateful and stateless NAT64 configurations. This output is
displayed as follows.
ServerIron ADX# rconsole 1 1
ServerIron ADX1/1# show nat64 statistics all
*********************
NAT64 Gateway STATISTICS
*********************
Packet processing:
Pre-proc internal SIP map create = 18
Pre-proc create DIP by removing prefix = 17
Pre-proc pending drop = 0
Stateless IPv6 prefix prepended = 0
Stateful IPv6 prefix prepended = 31
6->4 initiate dynamic learning = 0
4->6 initiate dynamic learning = 0
6->4 cannot initiate learning table full = 0
4->6 cannot initiate learning table full = 0
IPv6 statistics:
6->4 pkts recv = 18
6->4 v6 error = 0
Fast path statistics:
6->4 fast path candidate = 18
6->4 fast path processed pkt = 17
6->4 fast path processed pkt last sec = 0
6->4 fast path processed bytes = 2235
6->4 fast path processed bytes last sec = 0
6->4 fast path num tcp session lookup = 17
6->4 fast path num tcp session lookup found = 14
4->6 fast path candidate = 16
4->6 fast path processed pkt = 16
4->6 fast path processed pkt last sec = 0
4->6 fast path processed bytes = 1371
4->6 fast path processed bytes last sec = 0
4->6 nat64 num tcp session lookup = 16
4->6 fast path nat64 num tcp session lookup found = 0
Slow path statistics:
Slow path processed pkt = 0
Stateless Statistics:
TCP 6->4 = 0
TCP 4->6 = 0
TABLE 5 Display fields for show nat translation
This field... Displays...
Pro The Layer 4 Protocol: TCP. UDP or ICMP.
Client IP: The IPv6 Client IP address.
NAT IP The translated IP address from the NAT64 IPv4 pool.
Dest IP The IP address of the internal IPv4 resource.