Technical information

2.2.1.4 Card Tray Assembly

1. Refer to Figure 5-2.

2. Remove the anode cap 1 .

3. Remove the DAG connectors 2 from the video card and the mains

socket.

4. Metal Card Tray Versions only: Remove the short DAG ground leads from

the metal card tray.

5. Unplug the scan connector 3 .

6. Unplug the degauss connector 4 .

7. Place the display front downward on a table and lift the main card

assembly away.

PICTURE 23

Figure 5-2. Card Tray Assembly, 8513 Display

Replacement:

Replace the Card Tray Assembly using the above instructions in reverse

order.

PS/2 Displays Maintenance Manual

Card Tray Assembly

2.2.1.4 - 1