Technical information

1.3.5 Card Tray Assemblies

Card tray assemblies include the analog and video cards, the brightness

and contrast controls, and the ac inlet connector. However, card tray

assemblies are different for most of the displays, and procedures specific

to each individual display type are presented in the related sections in

"Part II. Display-Specific Service Information."

To remove the card tray assembly:

1. Power off the system and the display, and disconnect all cables (see

"Powering Off the System" in topic 1.1.3).

2. Remove the tilt swivel stand (see "Tilt Swivel Stand" in topic 1.3.1),

or the lift tilt swivel stand (see "Lift Tilt Swivel Stand" in

topic 1.3.2).

3. Remove the rear cover (see "Rear Cover" in topic 1.3.3).

4. Refer to "Part II. Display-Specific Service Information" for detailed

instructions and illustrations for the type of display you are

servicing.

PS/2 Displays Maintenance Manual

Card Tray Assemblies

1.3.5 - 1