Applica RV500C : Technical information : Page 222

2.7.2.1 Function Checks

Basic functions can be checked using the self-test raster.

Refer to "Adjustment Procedures" in topic 2.7.2.3 when adjustments are

required.

Refer to the "Display-Specific Removals and Replacements" in topic 2.7.1

for removal and replacement procedures.

+------------------------------------------------------------------------+

¦ Symptom ¦ Action ¦

+-----------------------+------------------------------------------------¦

¦ Any problems. ¦ First, check all connections and plugs for ¦

¦ ¦ continuity. ¦

+-----------------------+------------------------------------------------¦

¦ Green LED lit but ¦ Adjust G2 control clockwise until test raster ¦

¦ test raster missing. ¦ appears AGAINST background raster. If no ¦

¦ ¦ raster appears, replace ITC. ¦

+-----------------------+------------------------------------------------¦

¦ Test raster is not ¦ Adjust gain controls for missing colors. If ¦

¦ white. ¦ colors reappear, reset color point of ITC. ¦

¦ ¦ Otherwise replace ITC. ¦

+-----------------------+------------------------------------------------¦

¦ Background raster is ¦ Adjust cutoff controls for missing colors. If ¦

¦ not white. ¦ colors reappear, reset color point of ITC. ¦

¦ ¦ Otherwise replace ITC. ¦

+-----------------------+------------------------------------------------¦

¦ Test raster scan is ¦ If partially collapsed, adjust as appropriate. ¦

¦ collapsed ¦ If fully collapsed, replace card tray ¦

¦ horizontally or ¦ assembly. ¦

¦ vertically. ¦ ¦

+------------------------------------------------------------------------+

PS/2 Displays Maintenance Manual

Function Checks

2.7.2.1 - 1