Technical information

2.5.1.6 Signal Cable
The signal cable is clamped to the card tray.
1. Refer to Figure 8-6.
2. Remove the P-clip 1 from the card tray.
3. Release the two cable ties 2 .
4. Turn the card tray over.
5. Release the metal clamp 3 from the underside of the card tray.
6. Ease the signal cable out from the card tray.
PICTURE 37
Figure 8-6. Removing the Signal Cable, 8517/9517 Displays
Replacement:
Ensure that both the P-clip and the clamp are in contact with the braid of
the signal cable.
PS/2 Displays Maintenance Manual
Signal Cable
¦ Copyright IBM Corp. 1993
2.5.1.6 - 1