Manualshelf

Technical information

ManualsBrandsApplica ManualsHousehold AppliancesRV500C
141142143144145146147148149150
2.5.1.4 Electromagnetic Interference Shield
1. Refer to Figure 8-2.
2. Remove the three screws 1 from each side of the shield, and the
ground wire 2 .
3. Lift the shield at the back and move it away from the retaining slots
on the Integrated Tube Component (ITC) shield.
PICTURE 33
Figure 8-2. Removing the Electromagnetic Interference Shield, 8517
Display
Replacement:
Ensure that the spring tabs on the bottom of the interference shield are
correctly disposed on either side of the card tray, and the ground wire is
reconnected.
PS/2 Displays Maintenance Manual
Electromagnetic Interference Shield
¦ Copyright IBM Corp. 1993
2.5.1.4 - 1