Service manual

06/2010
2. Remove the electronics drawer. To remove the board requires a ¼” socket or a 5/16” wrench.
3. Install the new DSI board and re-attach the wire harnesses. Be sure to route the ignition harness
separate from the other control harnesses.
Kit Parts List:
3158 Direct Spark Ignition (DSI) board
3166 DSI Mounting Bracket
Figures:
none
Model: RV500-F-L / RV501-F-L
SM500-03 Electrical Drawer Assembly Change
Other service documents required:
SM500-16 Testing the RV500
Tools Required:
none
1. Turn power OFF.
2. Remove the door and locate the electrical drawer AS 1438 (see figure -3).