Operating instructions

SPECIFICATIONS
Inputs:
Mic/Line Input Type: 8 Balanced and RF filtered
Mic/Line Input Impedance: >2.5K, any gain setting
Mic/Line Input Gain Range: +15dB to -63dB, plus mute
Mic/Line Input Gain Settings: 0dB, +30dB, +50dB
EIN, 20-20K Hz: -126dB (+50dB gain)
Maximum Input Level: +20dBu at 0dB gain
-10dBu at 30dB gain
-30dBu at 50dB gain
Phantom Power: +15V (switched per channel)
Line Only Type: 2 Balanced and RF filtered
Line Only Input Impedance: >30K balanced
Line Only Input Gain Range: +15dB to -63dB, plus mute
Tone Controls: High shelving type
Turnover freq: 1 kHz
3dB, 6dB, 8dB cut or boost @10kHz
Lo-cut 6dB/octave @75Hz, 90Hz, 110Hz, 130Hz, 190Hz, 280Hz,
600Hz
Outputs:
Line Output Type: 4 Balanced and RF filtered
Output Gain Range: +15dB to –63dB, 1dB steps, plus mute
Maximum Output Level +20dBu
Output Impedance: 200 ohms balanced, 100 ohms unbalanced
Matrix Crosspoint Gain Settings: -6dB, 0dB, +3dB, off
Programmable Inputs/Outputs:
Programmable Input Range: 0VDC - 5VDC
Analog Control: 0dB to -30dB plus off control range
156mV/dB control sensitivity
Logic Control: Active Low
Programmable Output: Active low
Max sink current: 100 mA
Max supply voltage: 40VDC
System:
Maximum System Gain: 83dB (input to output)
System THD: 0.1%, 0dBu in, 0dBu out
System IMD: 0.1%, 0dBu in, 0dBu out
Power Consumption: 20 Watts max at 16.5VAC
Weight: 4 lbs.
Dimensions: 1.75 x 8 x 19 inches
Optional accessories: - TA1 Line Level Adapter
- VI24 Video Switcher Interface
- RCW-VLS Remote Volume Control
Specifications subject to change without notice.
This product meets the CE Compliance Standards - EN55022 and
EN50082-1:1998. A copy of the Declaration of Conformity may be
requested from your dealer or by contacting the factory directly:
Lectrosonics, Inc.
Marketing Department
581 Laser Rd. NE, Rio Rancho, NM 87124 USA
tel: [phone] fax: [phone] e-mail: [e-mail]
26