Installation guide

3344
© 2005 Directed Electronics—all rights reserved
ttaacchh lleeaarrnniinngg
TToo lleeaarrnn tthhee ttaacchh ssiiggnnaall::
1. Start the vehicle with the key.
2. Within 5 seconds, press and
HHOOLLDD
the Valet/Program switch.
3. The LED will light constant when the tach signal is learned.
4. Release the Valet/Program switch.
pprrooggrraammmmiinngg jjuummppeerrss
LIGHT
FLASH
JUMPER
TACH
THRESHOLD
JUMPER
TACH THRESHOLD OFF (DEFAULT)
TACH THRESHOLD ON
(-) LIGHT FLASH OUTPUT
(+) LIGHT FLASH OUTPUT (DEFAULT)
DRW-96