Installation Guide
Table Of Contents
- INSTALLATION GUIDE
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the range
- Installing the anti-tip bracket
- Electrical connection
- Final checklist
- GUIDE D’INSTALLATION
- Consignes de sécurité et mises en garde
- Pièces fournies pour l’installation
- Outils requis pour l’installation (non fournis avec l’appareil)
- Identification du modèle
- Avant l’installation
- Dimensions du produit
- Dimensions de dégagement
- Installation du dosseret en option
- Emplacement de l’alimentation en électricité
- Exigences relatives à la ventilation
- Installation des pattes ajustables
- Déplacement de la cuisinière
- Installation du support antibasculement
- Raccordement électrique
- Liste de vérification finale
8
A
B
D
E
C
FITTING THE OPTIONAL BACKGUARD
Island trim and backguard
zz
It is mandatory to install and use the range with
either the island trim or the optional backguard
correctly in place.
zz
The island trim is already fitted to the range while
the backguard can be purchased as a separate kit.
zz
If replacing the island trim with the backguard,
assemble it by using the same screws/spacers
used for fixing the island trim.
Grounded outlet
The electric cord with 4-prong ground plug
(NEMA14-50P) shall have a minimum length
of48"(1220mm) beyond the back of the range.
LOCATION OF ELECTRICAL SUPPLY
Final position of cooker against wall
Left side
of cavity
Floor
Electricity
B
A AC
SUPPLY AREA DIMENSIONS INCHES MM
A Distance from either edge of Range to supply area 1/4 6
B Height of electrical supply area (from floor) 8 1/8 – 10 1/8 207 – 257
C Width of electrical supply areas 35 3/8 899
D Depth of supply area (ie maximum protrusion of electrical connection from wall) 4 1/2 115
A
B
D
E
C
D