Installation Guide
Table Of Contents
- INSTALLATION GUIDE
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the range
- Installing the anti-tip bracket
- Electrical connection
- Final checklist
- GUIDE D’INSTALLATION
- Consignes de sécurité et mises en garde
- Pièces fournies pour l’installation
- Outils requis pour l’installation (non fournis avec l’appareil)
- Identification du modèle
- Avant l’installation
- Dimensions du produit
- Dimensions de dégagement
- Installation du dosseret en option
- Emplacement de l’alimentation en électricité
- Exigences relatives à la ventilation
- Installation des pattes ajustables
- Déplacement de la cuisinière
- Installation du support antibasculement
- Raccordement électrique
- Liste de vérification finale
5
MODEL IDENTIFICATION
Model features may vary
36" Induction models
OR36SDI6
PRIOR TO INSTALLATION
Unpacking and handling
zz
Inspect the range to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate a damage claim.
Fisher & Paykel is not responsible for shipping damage.
zz
DO NOT discard any packing material until the range has been inspected.
zz
Remove the outer carton and any packing material from the range. Some models are supplied with a protective film on steel and aluminum parts.
This film must be removed before installing or using the appliance.