Installation Guide

10
INSTALLATION DES PATTES AJUSTABLES
Installation des revêtements de pattes ajustables (en option)
Si vous souhaitez utiliser les revêtements de pattes ajustables, installez-les pendant
quelacuisinière est basculée vers l’arrière.
3 Fente les panneaux extérieurs sur
lespanneaux intérieurs tendus.
5 Tenez la cuisinière en
position verticale.
6 Ajustez les panneaux intérieurs
descouvre-pieds en fonction de
lahauteur des pieds.
4 Fixez les couvercles aux supports
àl’aide des vis fournies.
2 Tordez doucement les côtés
despanneaux intérieurs vers
l’extérieurpour les tendre.
1 Pointe de la gamme sur son
dos et fixer les supports aux
trous demontage.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
Installation des pattes ajustables
Les pattes ajustables doivent être installées sur la base de la cuisinière avant l’utilisation.
Appuyez la partie arrière de la cuisinière sur un morceau de l’emballage en polystyrène,
afind’exposer la base pour l’installation des pattes.
IMPORTANT
Veillez à ne pas endommager la cuisinière pendant cette opération.
Installez les quatre pattes en les vissant solidement dans la base, comme illustré.
Mise de niveau de la cuisinière
zz
Vous pouvez mettre la cuisinière
de niveau en vissant les extrémités
inférieures despattes vers l’INTÉRIEUR
ou l’EXTÉRIEUR.
zz
De petits ajustements peuvent être
effectués lorsque la cuisinière est
en position verticale, mais il pourrait
être nécessaire d’incliner la cuisinière
de nouveau pour effectuer des
ajustements plus importants.