MSDS

301143, 2122 EPOXY PUTTY,
RESIN COMPONENT
MATERIAL SAFETY DATA SHEET
Page 6 of 7
Rev 6
26/09/13
Waste treatment methods - contaminated packaging
Contaminated packaging is classified as hazardous waste. Empty containers should be
transported/delivered using a registered waste carrier for local recycling or waste disposal. Waste disposal
number - 15 01 08* Packaging containing residues or contaminated by dangerous substances.
UN Proper shipping name: Not classified as dangerous in the meaning of transport regulations.
Contains: BISPHENOL-A-(EPICHLORHYDRIN), EPOXY RESIN (NUMBER AVERAGE
MOLECULAR WEIGHT <= 700)
Contains Environmental: BISPHENOL-A-(EPICHLORHYDRIN), EPOXY RESIN (NUMBER AVERAGE
MOLECULAR WEIGHT <= 700)
Indication of danger:
Xi - Irritant.
Contains epoxy constituents. See information supplied by the manufacturer.
R -phrase(s)
R43 - May cause sensitization by skin contact.
R36/38 - Irritating to eyes and skin.
R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S -phrase(s)
S 2 - Keep out of the reach of children.
S24 - Avoid contact with skin.
S28 - After contact with skin, wash immediately with plenty of soap and water.
S37 - Wear suitable gloves.
S61 - Avoid release to the environment. Refer to special instructions/safety data sheets.
SVHC Compliance As can be seen in section 3 this material does not contain any Substance of Very
High Concern (SVHC) as determined by the European REACH Regulation
1907/2006/EC in quantities above the reporting threshold.
International Inventories
United States TSCA: All chemicals in this product are listed in the inventory or, are exempt from the
inventory as a naturally occurring substances.
14. TRANSPORT INFORMATION
15. REGULATORY INFORMATION