MSDS

301143, 2122 EPOXY PUTTY,
RESIN COMPONENT
MATERIAL SAFETY DATA SHEET
Page 5 of 7
Rev 6
26/09/13
LETHAL CONCENTRATION & LETHAL DOSE TOXICITY FOR PRODUCT COMPONENTS
BISPHENOL-A-(EPICHLORHYDRIN), EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT <=
700),
CAS NO 25068-38-6
= 11400 mg/kg Oral LD50 Rat
EPOXY PHENOL FORMALDEHYDE RESIN, CAS NO 28064-14-4
LD50, LC50
Skin irritation
May cause sensitisation by skin contact.
Eye irritation
May cause eye irritation with susceptible persons.
Sensitization
May cause sensitisation of susceptible persons by skin contact. Epoxy resins with an average molecular
weight of less than 700 may cause sensitisation.
Chronic toxicity
Repeated or prolonged skin contact with the unexposed coating may cause skin irritation and/or dermatitis
and sensitisation of susceptible persons.
Mobility
Water contaminating. The product is insoluble and sinks in water.
Persistence and degradability
Not inherently biodegradable.
Bioaccumulative potential
Taking into consideration the properties of several components, the product is estimated not to be readily
biodegradable according to OECD classification.
Ozone depletion potential
No ozone depleting chemicals are present or used in manufacture.
Toxicity
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Waste treatment methods - unused products
Should not be released into the environment. Classified as hazardous waste according to (national
equivalent of EC-Dir. 91/689; disposal of toxic and hazardous waste). It must undergo special treatment, e.g.
at suitable disposal site, to comply with local regulations. Use a registered waste disposal company and
supply accurate information about the nature of the hazard. Waste disposal number - 08 04 12 Adhesive and
sealant sludges other than those mentioned in 08 04 11.
11. TOXICOLOGICAL INFORMATION
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS