MSDS

301143, 2122 EPOXY PUTTY,
RESIN COMPONENT
MATERIAL SAFETY DATA SHEET
Page 3 of 7
Rev 6
26/09/13
Personal precautions, protective equipment and emergency procedures
Avoid contact with skin and eyes. Use appropriate personal protective equipment.
Environmental precautions
Should not be released into the environment. Prevent product from entering drains. Avoid subsoil
penetration. Local authorities should be advised if significant spillages cannot be contained.
Methods and material for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Sweep up and shovel into
suitable containers for disposal.
Precautions for safe handling
Avoid contact with skin and eyes. Change out of working clothes and wash hands before breaks and at the
end of the working day. Keep away from open flames, hot surfaces and sources of ignition.
Conditions for safe storage, including any incompatibilities
Keep at temperatures between 5°C and 25°C. Keep tightly closed in a dry and cool place.
Packaging material
Store in original container.
Engineering measures to reduce exposure
Ensure adequate ventilation, especially in confined areas.
Exposure Limit Values
Personal protective equipment
Respiratory protection
No personal respiratory protective equipment normally required.
Hand protection
PVC or other plastic material gloves. Gloves should be replaced immediately if signs of degradation are
observed.
Eye/face protection
Safety glasses [BS EN 166]. Eye wash bottle with pure water.
Skin and body protection
Lightweight protective clothing.
Hygiene measures
When using, do not eat, drink or smoke. Regular cleaning of equipment, work area and clothing. Change out
of working clothes and wash hands before breaks and at the end of the working day. Remove and wash
contaminated clothing before re-use.
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION