MSDS

301143, 2122 EPOXY PUTTY,
RESIN COMPONENT
MATERIAL SAFETY DATA SHEET
Page 2 of 7
Rev 6
26/09/13
Hazardous ingredients:
BISPHENOL-A-(EPICHLORHYDRIN), EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT <=
700)
CAS: 25068-38-6 20-40%
[Xi] R36/R38 R43; [N] R51-53
EPOXY PHENOL FORMALDEHYDE RESIN
CAS: 28064-14-4 1-5%
[Xi] R36/R38 R43; [N] R51-53
General advice
Show this safety data sheet to medical personnel. Take off contaminated clothing and shoes immediately.
Wash contaminated clothing before re-use.
Inhalation:
Move to fresh air in case of accidental inhalation of fumes from overheating or combustion.
Skin contact:
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes.
Eye contact
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing
for at least 15 minutes. Keep eyes wide open while rinsing. If eye irritation persists, consult a specialist.
Ingestion:
Clean mouth with water and afterwards drink plenty of water. Do not induce vomiting. If a person vomits
when lying on his back, place him in the recovery position.
Suitable extinguishing media
The product is not flammable. Use extinguishing measures that are appropriate to local circumstances and
the surrounding environment.
Specific hazards arising from the substance or mixture
In the event of fire and/or explosion do not breathe fumes. Thermal decomposition can lead to release of
irritating gases and vapors.
Advice for firefighters
In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained breathing
apparatus.
Specific methods
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
3. COMPOSITION / INFORMATION ON INGREDIENTS
4. FIRST AID MEASURES
5. FIRE-FIGHTINGMEASURES