MSDS

301144, 2122 EPOXY PUTTY,
HARDENER COMPONENT
MATERIAL SAFETY DATA SHEET
Page 4 of 7
Rev 6
26/09/13
Form: Solid.
Appearance: Viscous brown paste.
Odour: Ammoniacal.
Odour threshold: No data found.
Color: Light brown.
pH: Not applicable.
Flash point: Does not flash.
Flammability (solid, gas): Not applicable
Explosion limits:
- lower (LEL): Not applicable.
- upper (UEL): Not applicable.
Specific gravity (g/cc): 1.85 ± 0.03
Decomposition temperature: >150°C
Water solubility: Insoluble.
Viscosity: Not applicable - material is a solid.
Percent volatile by volume: 0%
Reactivity
No reactive hazards known.
Chemical Stability
Stable under recommended storage conditions.
Possibilty of hazardous reactions
Hazardous polymerization does not occur.
Conditions to avoid
Keep away from open flames, hot surfaces and sources of ignition.
Incompatible materials
Strong oxidising agents. Amines.
Hazardous decomposition products
Combustion produces oxides of carbon (COx) including highly poisonous carbon monoxide. Nitrogen
oxides (NOx). Sulphur oxides.
LETHAL CONCENTRATION & LETHAL DOSE TOXICITY FOR PRODUCT COMPONENTS
2,4,6-TRIS (DIMETHYLAMINOMETHYL) PHENOL, CAS NO 90-72-2
= 1000 mg/kg Oral LD50 Rat
= 1280 mg/kg Dermal LD50 Rat
Sensitisation
No sensitisation reponses were observed.
Chronic toxicity
Chronic exposure may cause dermatitis.
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
11. TOXICOLOGICAL INFORMATION