MSDS

301144, 2122 EPOXY PUTTY,
HARDENER COMPONENT
MATERIAL SAFETY DATA SHEET
Page 3 of 7
Rev 6
26/09/13
Personal precautions, protective equipment and emergency procedures
Avoid contact with skin and eyes. Use appropriate personal protective equipment.
Environmental precautions
Should not be released into the environment. Do not allow material to contaminate ground water system.
Avoid subsoil penetration. Local authorities should be advised if significant spillages cannot be contained.
Methods and material for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Sweep up and shovel into
suitable containers for disposal.
Precautions for safe handling
Avoid contact with skin and eyes. Change out of working clothes and wash hands before breaks and at
the end of the working day.
Conditions for safe storage, including any incompatibilities
Keep out of reach of children. Keep tightly closed in a dry and cool place. Keep at temperatures between
5°C and 25°C.
Packaging material
Store in original container.
Occupational exposure controls
Engineering measures to reduce exposure
Ensure adequate ventilation, especially in confined areas.
Exposure Limit Values
Personal protective equipment
Respiratory protection
No personal respiratory protective equipment normally required.
Hand protection
Rubber or other plastic material gloves. Gloves should be replaced immediately if signs of degradation
are observed.
Eye/face protection
Safety glasses [BS EN 166].
Skin and body protection
Lightweight protective clothing.
Hygiene measures
When using, do not eat, drink or smoke. Regular cleaning of equipment, work area and clothing. Change
out of working clothes and wash hands before breaks and at the end of the working day. Remove and
wash contaminated clothing before re-use.
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION